Tank Bottom Protection

Application Problem

Tank bottoms corrode from water and sediment. In the field, failures usually appear as blistering, cracking, chalking, delamination, rust creep from edges, or rapid wear in high-contact areas.

Coating Solution Design

Use high-build tank bottom coating. The design should define primer compatibility, functional layer thickness, topcoat resistance, curing window, and inspection points before work starts.

Recommended Coating System

For Tank Bottom Protection, use Oil Storage Tank Coating as the primary recommendation. Compare Petrochemical Tank Lining when the project needs stronger mechanical durability or heat control, and use Anti-Corrosion Epoxy Coating where the substrate, exposure medium, or maintenance window requires an additional protective layer. The final specification should confirm surface preparation, dry film thickness, curing time, and inspection criteria before RFQ.

Related Industries

Tank Bottom Protection is common in LNG Facility Coating and Mining Industry Coating. Each industry changes the coating specification because process temperature, humidity, chemicals, and surface preparation standards are different.

Field Implementation Notes

• Clean oil, dust, salts, and loose rust before coating.
• Measure steel temperature, humidity, and dew point before application.
• Apply the specified film thickness in controlled passes.
• Inspect edges, welds, corners, supports, and splash zones after curing.

RFQ CTA

Send substrate, operating temperature, corrosion medium, coating area, and shutdown window so an engineer can size the coating system. Request RFQ