When this product direction fits
Solar-reflective systems for roofs, tanks and exposed surfaces where absorbed solar heat is the main concern.
Solar Reflective Thermal Coatings
DY-36
Rare-Earth Transparent Thermal Insulation Coating
Solar-reflective systems for roofs, tanks and exposed surfaces where absorbed solar heat is the main concern.
Product overview
Solar-reflective systems for roofs, tanks and exposed surfaces where absorbed solar heat is the main concern.
A transparent coating based on an inorganic-organic interpenetrating polymer network with rare-earth oxides and nano-scale ATO/ITO functional fillers.
Problems addressed
Solar heat through glazingUV and infrared transmissionExisting glass requiring an applied coating
Selection guidance
How this system differs
This series addresses solar heat gain at exposed surfaces and is different from insulation intended to control heat passing from process equipment.
What must be confirmed
Suitability depends on the actual substrate, medium, concentration, temperature cycle, exposure mode and application window. Final system selection and project-specific instructions require technical review.
Product features and advantages
Visible light transmittance ≥70%
Infrared shielding ≥80%
UV shielding >90%
Can be applied to existing glass
Typical application context
Applications and operating conditions
Industrial Buildings & Logistics · Building Energy Efficiency: application review for Glazing · Windows · Transparent building envelope.
Solar-reflective systems for roofs, tanks and exposed surfaces where absorbed solar heat is the main concern. Confirm the substrate, exposure and maintenance access before final selection.
Suitable equipment
Industries
Industrial Buildings & Logistics
Building Energy Efficiency
Substrates and areas
Clean glass surfaces
Operating conditions
Indoor application at 5-35°C · Relative humidity <70%
DY-36
Technical parameters
Only values available in the reviewed product source are shown.
Technical parametersValueSource
AppearanceTransparent film
Application Environment5-35°C; relative humidity <70%Product source
Application Rate20 cc/m²Product source
Touch Dry Time30 min (2-3 h condition stated in source)Product source
Hard Cure Time24 h (4-5 h condition stated in source)Product source
Deodorisation Time30 dProduct source
Visible Light Transmittance≥70%Product source
Infrared Shielding≥80%Product source
UV Shielding>90%Product source
Project application guidance
Confirm substrate condition, contamination, corrosion, defects and access before work starts.
Remove oil, dust and loose material; prepare cleanliness and profile to the reviewed product procedure.
Check compatibility of retained coatings and complete a representative trial area when the existing system is uncertain.
Prepare and mix only according to the product source; do not improvise ratio, thinner or pot life.
Build a continuous system in controlled layers, with special attention to edges, welds, joints and shadow zones.
Protect the applied area through curing, then inspect continuity, visible defects and recorded source-backed acceptance items.
Source-specific procedure
Surface Preparation
Clean the glass twice, remove detergent residue, then wipe with ethanol and allow it to evaporate.
Application Environment
5-35°C; relative humidity <70%.
Mixing
Stir for at least 30 seconds and apply immediately.
Application Tools
Special sponge fitted to an aluminium channel.
Curing
Touch dry 30 minutes; hardening 24 hours.
Precautions
Apply continuously and avoid trapped air in the applicator sponge.
Packaging, storage and transport
StorageWater-based product; store sealed and request batch-specific handling guidance before use
Official product source: Rare-earth transparent heat insulation coating / DY-36 PDF
Quality checks
Check surface-preparation records, environmental conditions, layer continuity, edges, welds and visible defects. Use only acceptance criteria stated in the reviewed product or project documents.
Maintenance and repair
Inspect representative high-risk locations during planned maintenance. Clean the area, identify the cause of damage, feather sound edges and verify compatibility before local repair.
Scope and limitations
Suitability depends on the actual substrate, medium, concentration, temperature cycle, exposure mode and application window. Final system selection and project-specific instructions require technical review.
Technical documents
Documents for project evaluation
TDS, SDS, MSDS, test reports and other project-related technical documents are available based on specific project requirements. Please contact us through WhatsApp.
Related solutions
Industries
Related technical content
Related cases
PetrochemicalVertical storage tank
Petrochemical Storage Tank Exterior Protection
Outdoor solar exposure, industrial atmosphere and chloride-bearing coastal conditions.
View case
PetrochemicalLarge storage tank roof and exterior
Storage Tank Solar-Reflective Application
Strong solar radiation and outdoor weather exposure on roofs, tanks and building surfaces.
View case
Buildings & Energy EfficiencyMetal factory roof
Steel-Structure Factory Roof Solar-Reflective Application
Large exposed roof areas, joints and weathered substrates receive sustained solar radiation.
View case
Buildings & Energy EfficiencyLarge arched metal roof
Large Arched Industrial Roof Reflective Coating
Large exposed roof areas, joints and weathered substrates receive sustained solar radiation.
View caseRelated products
Water-Based Solar Reflective Coating
Solar-reflective systems for roofs, tanks and exposed surfaces where absorbed solar heat is the main concern.
Typical equipmentIndustrial roof · Storage tank
View product
Building Wall Thermal Insulation Coating
Thermal-management materials for equipment, pipework and building assemblies where heat-transfer control is required.
Typical equipmentBuilding wall · Industrial building envelope
View product
Aerogel Thermal Insulation Blanket
Flexible aerogel insulation blanket for equipment, pipework and tank insulation assemblies.
Typical equipmentIndustrial pipeline · Process equipment
View product
Thermal Insulation Energy-Saving Coating
Thermal-management materials for equipment, pipework and building assemblies where heat-transfer control is required.
Typical equipmentStorage tank · Pipeline
View productDAYU-X
Need Technical Support?
Share the equipment, substrate, medium, temperature and current problem for a focused technical review.